User Tools

Site Tools


Basic Configuration

Default login name and password

If you can ping another device from the NAS4Free server, then from another computer on the same subnet, point your Web Browser at the NAS4Free server IP Address ( in this example) You should be presented with a login/password dialogue box like that shown here.

At the login/password dialogue Enter:

  1. Default Username is admin,
  2. Default password is nas4free
  3. Select OK
The NAS4Free team strongly recommend that the default User name and Password be changed before putting NAS4Free into production.

You should be presented with the NAS4Free Web GUI System Status page as shown on the next page. The currently loaded version of NAS4Free is displayed on this page as well as other useful information.

WebGUI Layout

NAS4Free web pages are configured with the Navigation Tree in the Left Hand side of the page and the Display and Data entry area to the right of the Navigation Tree.

The NAS4Free Host name is displayed on this and all other NAS4Free WebGUI pages. This is useful when more than one NAS4Free will be administered.

The NAS4Free host name can be administered on the General setup page.

Within the Display and Data Entry areas of WebGUI pages, some displays have additional controls such as those shown here:

  1. - controls Adding another element
  2. - controls deleting or Removing an element
  3. - permits the user to Edit the attributes of an element.
documentation/setup_and_user_guide/basic_configuration.txt ยท Last modified: 2017/02/13 09:36 by zoon01